Easter Bunny Garland Tutorial

I’ll ease back in gently to the year and kick off with a cute tutorial for Easter which was first published last year in Love Sewing magazine


Easter Bunny Garland Tutorial

This is a great a scrap-busting project which will add a touch of adorable to your Easter celebrations.

To make this cute Easter bunny garland you will need

  1. Trace around the bunny template on to the smooth side of the Bondaweb using a pencil.
  2. Cut around the shape close to, but not on, your pencil line.Step-1&2.jpg
  3. Iron the Bondaweb bunny shape on to the reverse of your fabric. It should adhere quite strongly.Step-3.jpg
  4. Cut around your shape on the pencil lineStep-4-.jpg
  5. Score the Bondaweb paper with a pin and remove the backing paper.
  6. Cut 5cm of the 5mm ribbon and fold in half.
  7. Lay your cut out bunny shape on to the backing calico. Place the ribbon between the bunny’s ears and enclose the raw ends underneath your bunny shape. Leave at least 1cm of the folded ribbon exposed, this will form your hanging loop.Step 7.jpg
  8. Press to adhere the shape on to your calico, enclosing the ribbon loop.
  9. Trim the calico to match the bunny shape taking care not to cut the ribbon hanging loop. Small scissors will help you be more precise around the curves.Step-9.jpg
  10. Using a zig zag stitch on your sewing machine sew around the edge of your shape with the outside of the zig zag right on the edge of the shape. Take care on the curves and sew slowly.Step-10.jpg
  11. To add the tail, thread a hand sewing needle and tie a knot in the end of thread and pass the needle though the centre of pom pom. Secure the tail on to the bunny shape with a few stitches. You can use the template as a tail placement guide by lining up your shape with the template, putting the needle through the template, lifting the template and marking where the needle is with a fabric marker. This is your tail placement mark.Step 11.jpgStep 11_2.jpg
  12. Repeat for as many bunnies you’d like on your garland.
  13. Wrap some tape around the end of your jute ribbon to make it easier to thread and jute ribbon through the loops.

You’re done! Happy Easter!

4 thoughts on “Easter Bunny Garland Tutorial”

Leave a Reply to Kathy Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s